RELEASE NOTES FOR LOGTAG® Online

1.15 RELEASE 0

New Features

• Notification units activation code price increased from 6.25 USD to 6.75 USD
• Add light sensor data to shipment’s chart and report for capable loggers
• Add humidity data to shipment’s report for capable loggers
• Add temperature alarm excursion of data logger on shipment’s chart, when single logger is selected
• Add temperature alarm statistic to shipment’s PDF report
• Add device battery status to shipment’s info screen
• Register loggers when configure them from LTA3 (LTA 3.2.4 or later is required)
• Add support for Tive (Tive webhook should be configured prior)
• Add support for vaxtag+

Bug Fixes:

• Updated Troubleshooting Records: add minutes to temperature log and download timestamp
• Corrected Email/TextMessage Failure email
• Corrected chart tooltip for Firefox browser
• Corrected battery status for shipment CSV export
• Prevent sending activation code renew alerts for another distributor

1.14 RELEASE 0

New features:

• Add ability to see the data logger’s alarms profile details through the Location screen if device reported data
• Add ability to see the data logger’s alarms profile details through the Shipment screen if device reported data
• Add ability to see the data logger’s alarms profile details through the Devices screen if device attached to shipment or location
• Improve device registration, detect logger model on registration
• Improve device registration process, ask user to enter activation code and added to location for real time logger
• Add low battery and light sensor notifications for EVGEO logger, attached to the shipment
• Improve notification lists, add date time pickers to filter latest notifications
• Add zoom to readings for shipment chart
• Add ability to search for location by location name or device serial number
• Add ability to search for user by user details

Bug Fixes:

• Correct LTI-WM-WIFI device type for registered devices
• Improve locations settings view on iOS devices
• Update dashboard when new dual channel device is registered, both channels can be checked after registration.
• Performance improvements for enterprise level teams
• Add default frequency for PDF report (Monthly)

1.13 RELEASE 0

New Features

• Improve alarm repeat notifications to be more frequent: first 3 repeat messages are sent every 20 minutes, each one following the interval is increased
  • The primary and secondary coordinators are immediately notified via email and SMS.
  • The primary and secondary coordinators are once again notified after 20 minutes if the alarm event remained unacknowledged via email and SMS.
  • The primary and secondary coordinators and emergency contact are notified via email only after another 20 minutes if the alarm event remained unacknowledged.
  • The primary and secondary coordinators and emergency contact are notified via SMS only after another further 20 minutes if the alarm event remained unacknowledged. Each following notification delays are multiplied by 2 until a maximum of 8 hours is reached. Example: If the initial interval between notifications is 20 minutes, the delay for each subsequent notification will increase by a factor of 2, i.e. delays of 40 minutes, 80 minutes, 120 minutes.
  • All contacts, coordinators, and emergency contact, are notified via email and SMS after a further 40 minutes if the alarm event remains unacknowledged.
  • All contacts, coordinators, and emergency contact, are notified via email and SMS after a further 80 minutes if the alarm event remains unacknowledged.
  • All contacts, coordinators, and emergency contact, are notified via email and SMS after a further 120 minutes if the alarm event remains unacknowledged until a total of 22 alert notifications have been sent or the event is acknowledged.

• Add the ability to send periodically the Logger Data (pdf) for location. The report is based on the location primary coordinator account timezone and temperature unit.
• Auto-populate the data logger’s DEVICE NAME field with the logger description when LTD file uploaded
• Add support for VFC400-SP and SP-400
• Add support for VFC800-16/WIFI and SP-800
• Update Twilio SMS pricing to the latest values
• Improve Alarm email message, add instructions on how to stop receiving further notifications
• Improve information on LTO subscription renewal notification email

1.12 RELEASE 1

1.12 RELEASE 0

New features:

• Add ability to send periodically the Logger Data (csv) for location. Report is based on the location primary coordinator account timezone and temperature unit.
• Add Event log record for periodic report sent for location.
• Add a new csv export format that is compatible with the FL SHOTS IIS Server import file format.
• Add number on locations created and available to add in locations tab.
• Change default filter settings in Event Log, “Other” is not selected by default.

Bug Fixes:

• Upgrade the internal library to the latest versions without known vulnerabilities.
• Set Delivered option is available only for realtime data loggers in the shipment.

1.11 RELEASE 0

New features:

• Improve user experience for create shipment dialog.
• Added humidity value on map for geolocation capable loggers.
• Added labels on map for multiple geolocation capable loggers and group loggers at the same location.

Bug Fixes:

• Corrected time zone for shipment CSV export.
• Removed shipment dates update when other shipment settings are updated.
• Removed x button from logger tooltip on shipment map that trigger unexpected page reload.
• Added shipment events to search result for Event Log.
• Added missed humidity sign in location pdf report.

1.10 RELEASE 0

New features:

• Added EV-4GEO logger support.
• Use generic device description “EVGEO” for EV2GEO and EV4GEO devices.

Bug Fixes:

• Updated default view and export sorting in Event Log, sort by Occurred At date.
• Fixed empty shipments name in Event Log PDF export.

1.9 RELEASE 0

New features:

• Context-sensitive Help feature added to LogTag Online.
• Added Help icon to all screens and modals, and added tags for each screen.
• Added default articles to LogTag Online help view pane.
• Added context-sensitive help articles to the various screens the user has open.
• Articles added for Account and Team management.
• Articles added for Shipments and Transit Quick View.
• Articles and links added for Locations and Areas.
• Added help screens for Edit File, Edit Device, Share File and Deleted locations.
• Added FAQ articles to context help.
• Added support for playing YouTube videos (links).
• Added additional articles to help portal for context-sensitive help to link to.
• Added ability for Help to load content dynamically when page switched while open.
• Updated LTD File support for Dual Channel device to only contain specified channel.
• Added additional filter options to the Events log.
• Added ability to (also) search for logger serial numbers within shipments.
• Added indication to Locations pinned on the Dashboard if there are unacknowledged events.
• Improved Stripe activation code purchase confirmation with additional messages for success and cancelled.

Bug Fixes:

• Fixed bug where user acknowledgement could be reported incorrectly in Acknowledgement Email.
• Fixed setting remote configuration option for new registered loggers where remote configuration was not set immediately upon first successful communication.
• Fixed bug where shipment information was not exported when exporting the Events Log.
• Upgraded automated deployment for web project, and migrated deployment to latest OS version.
• Upgraded various components to improve security, removed components that were no longer being supported.
• Upgraded .NET version for major LogTag Online components.
• Upgraded PDF reporting engine to latest version.
• Removed unused code for original Beta warning message.
• Added X-Frame options header to protect against ‘ClickJacking’ Attacks.
• Improved terms and conditions and Support access checkboxes for Mobile View.

1.8 RELEASE 1

Bug Fixes:

• Corrected alarm not generated for UTRED30/UTREL30-WIFI second channel, when alarms were triggered at the same time for both channels.

1.7 RELEASE 0

New features:

• Add access to uploaded data from single use loggers if logger is not registered to any team
• Add support for UTREL30-16×2 support 

Bug Fixes:

• Allow registration of new serial numbers of TRIX-8
• Correct different password length allowed
• Clean up PDF reports for locations and files, remove blank pages and correct page split
• Add UI improvements for location inspect page
• Several improvements in page loading and page refresh
• Re-enable email to distributor when activation code is expired and stripe feature is enabled
• Correct number of expired locations in distributor email

1.6 RELEASE 1

• Added Alarm information to location PDF Report.
• Added Custom Fields to shipments.
• Added Logger Location/Position field to devices in shipments.
• Added additional information to shipment PDF reports and summaries.
• Terms and conditions are now required to be accepted by user before accessing LogTag Online.
• Display of LogTag Online website and emails on mobile devices has been improved.
• Distributors can now be immediately notified when a customer has applied an activation code to their account.
• Added optional Credit Card purchasing of LogTag Online features for customers of USA distributors.
• Updated the Distributor Portal to identify/filter activation codes purchased by Credit Card
• Updated Activation Code expiration email for users with the Credit Card purchases feature enabled.

Bug Fixes:

• Improved overall performance and fixed several intermittent data loading issues.
• Fixed bug with Location Alarm State sometimes not clearing after acknowledgement.
• Accounts with only Shipment and NotificationUnit activation codes no longer limited to just a single user.
• Improved email failed behaviour when temporary failure issues occur.
• Device description has been updated to only use descriptions provided by the current team.
• A bug where inviting a new team member did not fully work has been fixed.
• Enable Ev2Geo logger support

1.5 RELEASE 0

New features:

• Added support for UTRED30-16×2
• Added initial support for EV-2GEO
• Added label for humidity thresholds in pdf report
• Added new “View Only” user type
• Added support for integration with PagerDuty service
• Added ability to set shipment delivered manually

Bug Fixes:

• Improved troubleshooting record, discovered temp will be within min and max value depending on alarm type
• Disabled editing for location troubleshooting record for archived location
• Improved location pdf report
• Updated email address validation to comply with RFC 3696
• Allow free account user to apply default logger configuration profile in location
• Improved lost connection event behaviour
• Improved submit support ticket to distributor feature
• Improved shipment chart view in shipment report for LTM(LogTagMobile) IOS
• Added support for unicode in exported file names
• Added restriction for not allowing user leaves team if the user is primary coordinator of location or shipment
• Improved audit log recording behaviour

1.4 RELEASE 0

New features:

• Data List Export as PDF for file/location/shipment
• Added support for LogTagMobile applications
• Multiple changes to improve mobile view on LogTagOnline

Bug Fixes:

• Improve realtime readings processing from UTRED30-x/UTREL30-xx, added caching system for incoming readings
• Remove duplicate readings rows from readings table
• Add progress notification to user when call export of data to file
• Improve serial number validation when register devices
• Performance: reduce CPU usage when open shipment and files
• Clear email field after inviting a user to the team
• “Current” Date is replaced on “Completed” date in filled troubleshooting reports
• Resolved rare instances where LTO page freezes
• Resolved rare case when return to normal temperature notification was not send
• Add redirect to login page if login session expired
• Remove option to renew activation code until it billed at the end of the calendar month
• Improve email validation when register new account

1.3 RELEASE 0

New Features:

• Added CFR 21 Part 11 Digital Signatures functionality. files and shipments can be digitally signed using a pre-set list of signatures, available in the team settings; signatures tab. Signing shipments will add a digital signature to all files in the shipment. Admins or owners may be granted or revoked permission to sign files and shipments using Inspected, Approved, Rejected or Quarantine signatures. To add a signature to a file or shipment, navigate to the Reports; Logger Report tab and click the green “Signatures” button. All enabled signatures for your account type will be displayed in the dropdown list. Note that signing a file or shipment will add the signature to the entire file and not the selected date range. Once signed, all signatures within the file/shipment are displayed in the table above with a user and timestamp. The list of signatures is also attached to the bottom of the file/shipment report PDF.
• Added Multi-logger shipments. Up to 5 loggers may be added to a single shipment. Chart and report functionality allows for comparison of the multiple loggers in the shipments. Only loggers with a status of “Delivered” are displayed in the shipment multi-chart. Multi-logger shipment data can be exported as a zipped set of LTD or CSV files. Multiple loggers per shipment re specified in Bulk shipment creation by adding an additional line per logger serial number below the optional shipment name.
• Added Shipment Defaults. Default shipment coordinators can be defined for all future shipments, which are then prepopulate in the shipment notifications when creating a new shipment or creating bulk shipments.
• Added ability to receive alert notifications via WhatsApp. Alert notifications can now be configured to be sent through WhatsApp instead of SMS. To enable this feature, the “Allow WhatsApp alert feature” needs to be selected within the team settings. As well as enabling the feature in the team settings, the specific users who want to receive WhatsApp messages must enable the “Receive SMS messages in WhatsApp” under their account settings or an admin/owner can enable it for them.
• New users to a team now have all of the team’s locations pinned to their dashboard by default.
• Added an unpin location icon to pinned locations on the dashboard.
• Added Phone number, preferred contact time & Company logo’s to support form.
• Added Location data export in LTD file format. This is avaialble from the existing “Export” button in the location chart tab. The LTD file will be emailed to the registered accounts email address once generated.
• UTRED30-WIFI devices may be configured remotely by using a pre-set device configuration profile. Only UTRED30-WIFI devices running firmware version 8.06 or later and assigned to a Location can be remotely configured. A logger may be assigned and configured with a profile from the Location; settings tab. A devices’ configured profile can be viewed by editing the device via the Devices tab. Once a profile has been assigned to a device, it will be applied the next time the device contacts the server. During this time the profile name shows a “Status: Pending”. If the profile has been applied to the device successfully, the profile name shows a status of “Status: Applied”.
• The following pre-set configuration profiles are avaialble for UTRED30-WIFI devices:
  Ambient: Lower: 15°C 2 consecutive, Upper: 25°C 2 consecutive.
  Fridge: Lower: 2°C 2 consecutive, Upper: 8°C 2 consecutive
  Freezer: Upper: -15ׄ°C 2 consecutive
• Simplified Activation Code Renewal. A new column “Renew” button has been added to the “My Account”; “Billing” tab. Location codes which have not yet been expired may be renewed with a replacement code. The replacement code must have the same number of locations as the existing code. If the code has expired already, the Add New button should be used instead.
• A “I grant Support full access to team” checkbox has been added to the LogTagOnline team creation page.
• The ability to select hours and minutes has been added to all existing MMM-DD-YYYY date pickers in order to be able to more finely selected date and time ranges.
• Added a tooltip when editing location notifications, indicating alerts will continue to be sent until they are acknowledged.
• Added support for new UTREL-16, UTREL30-16, and UTREL30-WIFI loggers.
• Added Unicode support in Emails and SMS. Unicode characters are now shown correctly in both emails and SMS messages sent from LogTagOnline.
• Changed “Attach to Location” to “Move to Location” in the file edit dialog.
• File “Tags” have been changed to “Labels”. This better reflects that labels are only used as a clearer description of the file.
• USA mobile numbers with a mobile carrier of “Other” will consume notification credits and the unlimited SMS notifications do not apply.
• When an alert to a mobile number fails to be delivered, then that number will be marked as “Unverified” and the system will not try and send further alerts. Alerts are resumed once the user modifies their account settings with the “Save Changes” button. This prevents consumption of notification units to incorrectly entered mobile numbers.
• Reports downloaded within a specific date/time range now have the date/time range as a part of the filename. The reports included in this change are the Event Log, Location, File, and Shipment PDF’s.
• All dialogs (excluding location/shipment) can now be closed by clicking outside of them if there are no unsaved changes.
• Your local LogTag representative will be alerted when your activation codes run out or expire.
• Shipment logger status has been added in the shipment info tab. If the logger had any alarm events generated, a red cross is shown. If there were no alarms, a green tick is displayed.
• Bug Fixes:
• Chart images in reports are now scaled correctly if browser zoom level is not 100%.
• Removed ability for teams to incorrectly invite reseller team members to their account.
• “Readings not Displayed” event are now generated in all cases.
• Improved several mobile device view issues.
• Removed the ability for an admin level user to demote themselves.
• Resolved device dropdown within locations switching to “None” after saving settings changes.
• Event logs can now be filtered for “connection lost” and “connection restored” events.
• Resolved incorrect handling of any daylight-saving time shift in shipment reports.
• Resolved rare instances where location device information would not load.
• Undelivered SMS/Email events now displays correct acknowledgement time.
• Most recent file is now shown in the Shipment Data List instead of the first file received.
• Reduce instance of LogTagOnline generated emails being marked as spam.
• Min/Max values are now being correctly rounded in all cases in the troubleshooting report.
• Zoomed shipment report data is now correctly calculated.
• Delivered email/sms notifications are now being sent after removing remaining undelivered loggers from shipments.
• File CSV export date-time now aligns with LogTag Analyzer date time calculation.
• VFC inspection reports not always show the full data for the selected range.
• Shipment chart data displayed now correctly accounts for daylight-savings offsets.
• Uploading the same logger twice will now only generate one alarm if required.
• Recurring alarms can now be acknowledged in all cases.

1.1 RELEASE 0

• New Features:
• Added transit user team profile.
• Added shipment tab.
• Added create shipment.
• Added shipment detail modal.
• Added messaging tab.
• Added UUID to reports, based on first date, last date, timezone, file/location id.
• Added CSV date/time format.
• Added user emails under edit team.
• Added ability to change users phone number in edit team.
• Added remove from team/leave team warning.
• Added support for “readings not displayed” event.
• Continues to send alerts until acknowledged.
• Added warning text that prestart readings will be lost when attaching to location.
• LTO now has the ability to detect if a pdf file generated from LTO has been altered.
• Improved Auit log internal table.
• Bug Fixes:
• Activation code list not updated when code added.
• Firefox – search by date with dash not working.
• Occasionally some devices are not in the list.
• Alarm escalation procedure not cancelled when archiving location.
• Split app service live plan to improve performance.