Not applicable
Protective Enclosure
- IP67 – Dust & Waterproof resistant
- Clear, high impact polycarbonate plastic case material
- Supports all non-External Probe products.
The LogTag® Protective Enclosure is specifically designed for use with LogTag® Logger products and allows LogTags® to be used in harsh environments. The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change in the same environment. The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed logger’s LCD or indicators. Conservatively rated at IP67 (equivalent to NEMA6).
| Order Code | 200-000020 |
| LogTag® Models Supported | TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, all USB loggers, (except humidity models) |
| Storage temperature range | -40°C to +85°C (-40°F to +185°F) |
| Protection rating | IP67 (equivalent to NEMA6) for temperatures 1°C to +40°C (33°F to +104°F) |
| Case material | Clear Polycarbonate |
| Seal Material | Silicon rubber |
| Chemical resistance | In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures. |
| Size | 104mm (L- not including lug) x 76.5mm (W – including clips and hinge) x 13mm D |
| Weight | 41g |
| T90 thermal performance | With TRIX-8 in 1 m/s air: T90 = to 10 minutes. With TRID30-7x in 1 m/s air: T90 = to 17minutes |