A multi-alarm model is available for this product. The UTRIX-16M supports up to 6 configurable alarms instead of the typical 2.
The LogTag® UTRIX-16 satisfies the growing need for a cost effective and reliable multi-use temperature logger. It requires no special hardware or proprietary software to access the recorded data and can generate a fully detailed PDF report.
The UTRIX-16 stores real-time temperature readings over a measurement range of -30°C to +70°C (-22°F to +158°F), displays user-configurable alerts, and comes with an integrated, long-life USB connector.
The UTRIX-16 plugs directly into the computer USB for easy configuration by the user for a wide range of recording and alert conditions. Upon download, it automatically generates a fully detailed PDF report with the option to download the data using the freely available LogTag® Analyzer software for a more detailed analysis.
A red ALERT indicator provides an immediate indication – without access to a PC – if any readings are outside the limits specified at the time the unit was configured. A green OK indicator provides immediate visual confirmation that the unit is operating.
|Sensor Measurement Range||-30°C to +70°C (-22°F to +158°F).|
|Operating Temperature Range||-30°C to +70°C (-22°F to +158°F).*|
|Storage Temperature Range||0°C to +40°C (32°F to +104°F).|
|Rated Temperature Reading Accuracy|| Better than ±0.5°C (±0.9°F) for -20°C to +40°C (-4°F to +104°F).|
Better than ±0.7°C (±1.3°F) for -25°C to -20°C (-13°F to -4°F) & +40°C to +60°C (+104°F to +140°F).
Better than ±0.8°C (±1.5°F) for +60°C to +70°C (+140°F to +158°F).
Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below.
Accuracy figures can be improved by recalibration.
|Rated Temperature Reading Resolution|| Less than 0.1°C/F.|
Please see the Rated Native Resolution chart below.
LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
|Sensor Reaction Time||Typically less than 7 minutes (T90) in moving air (1m/s) in EN12830:1999.|
|Recording Capacity||16,129 temperature readings. 56 days @ 5min logging, 168 days @ 15min logging.|
|Sampling Interval||Configurable from 30 seconds to 18 hours.|
|Logging Start Options||Push button start (with configurable start delay from 1 minute to 72 hours) or specific date & time.|
|Recording Indication||Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator.|
|Download Time|| Typically with full memory (16,129 readings) in less than 30 seconds from time of insertion to availability of PDF report.|
Typically less than 10 seconds from time of insertion to availability of LTD file in LogTag® Analyzer (if configured).
|Environmental||IEC 60529: IP64 with USB cap fitted.|
|Power Source||3V Li-Mg Battery.|
|Battery Life||Typically 2 – 3 years with normal use (15 minute sampling interval, download data monthly), provided Logger is kept within the Storage Temperature Range when not in use.|
|Real Time Clock|| Built-in real time clock.|
Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day).
Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
|Connection Interface||USB 2.0, A-type plug|
|Software||PDF Reader, LogTag® Analyzer 2.5 or higher.|
|Size||93mm(H) x 54.5mm(W) x 8.6mm(T) including protective USB cap.|
|Footnote||*(-30°C to +60 °C applies to Loggers with serial numbers 5x40x44197 or greater. Loggers with serial numbers prior to this have an operating temperature range of -25°C to +60°C).|
Compliance and Certifications