The LogTag® TREX-8 is a versatile, wide range, multitrip Temperature Logger with interchangeable External Probes, featuring high resolution temperature readings over a measurement range of -40°C to +99°C (-40°F to +210°F).
Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST100 type remote temperature sensors.
Using the LogTag® Interface and LogTag’s freely available companion software LogTag® Analyzer, the LogTag is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator.
Readings are downloaded using LogTag® Analyzer which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.
The LogTag® TREX-8 complies with the relevant international standards for temperature monitoring devices:- FCC, CE, C-TICK and RoHS. This demonstrates the quality and suitability of the LogTag® TRIX-8 for temperature monitoring applications where accuracy and consistency is required.
|External Sensor Measurement Range||-40°C to +99°C (-40°F to +210°F)|
|Operating Temperature Range||-40°C to +85°C (-40°F to +185°F).|
|Storage Temperature Range||-10°C to +55°C (14°F to +131°F).|
|Rated Temperature Reading Accuracy|| Better than ±0.5°C for -10°C to +40°C.|
Better than ±0.7°C for -10°C to -30°C and +40°C to +60°C.
Better than ±0.8°C for -30°C to -40°C and +60°C to +80°C.
Better than ±1.0°C for +80°C to +99°C.
Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below.
Accuracy figures can be improved by recalibration.
|Rated Temperature Reading Resolution|| Less than 0.1°C for -40°C to +40°C.|
Less than 0.2°C for +40°C to +80°C.
Less than 0.6°C for +80°C to +99°C.
Please see the Rated Native Resolution chart below.
LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
|Sensor Reaction Time||Typically less than 2 minutes (T90) in moving air (1m/s) for ST100T, ST100H and ST100S types.|
|Recording Capacity||8031 temperature readings. 53 days @ 10min logging, 80 days @ 15min logging.|
|Sampling Interval||Configurable from 30 seconds to several hours.|
|Logging Start Options||Push button start or specific date & time. Optional start delay of up to 18 hours.|
|Recording Indication||Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator.|
|Download Time||Typically less than 5 seconds for full memory (8031 readings), depending on computer or readout device used.|
|Power Source||3V Li-Mg Battery.|
|Battery Life||2 – 3 years of normal use (based on 15 minute logging, download data monthly).|
|Real Time Clock|| Built-in real time clock.|
Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day).
Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
|Standard Remote Sensor Cable Length||Standard: 1.5m (4’11").|
Extended: 3m (9’10") (Recommended maximum).
|Remote Sensor Cable Type||PTFE (FDA food contact rated), coaxial.|
|Size||86mm(H) x 54.5mm(W) x 8.6mm(T).|
|Weight||36g (without External Probe).|
Compliance and Certifications