Release Notes for LogTag® Analyzer 3

3.0 release 8b

  • Fixed a bug with the 3.0r8 installer where additional user accounts are prompted to run the installer again to verify files.

3.0 release 8

  • Fixed bug where beeper was incorrectly shown when creating USB logger profiles.
  • Added apply zoom to all charts feature when Manually Scaling.
  • Improved diagnostic email system to still allow sending if no mail client is available on PC.
  • Added shift chart functionality in Multi-Chart.
  • Profiles now handle new lower limits for SRIC-4 and UTRID-16 products.
  • Changed minimum alarm separation between Upper and Lower alarms from 1 degree to 0.1 degree.
  • UTRIX-16 and UTRIX-16M configuration has been merged to allow both to be configured at the same time.
  • USRIC-8 and USRIC-8M configuration has been merged to allow both to be configured at the same time.
  • Average chart is now regenerated when a range change occurs.
  • Added Fast Start configuration for loggers which support it.
  • Added native support for Gmail in SMTP server settings.
  • Upgraded to .NET version 4.6.1 to support Gmail.
  • Added support for the up and coming HID Interfaces.
  • Fixed bug with profiles where the number of readings were limited for TRED-16, USRIC-16 and TRIX-16.
  • Fixed bug when creating reports that the Chart Image was sometimes not displayed.
  • Fixed bug where printing sometimes created reports without charts.
  • Fixed bug where sometimes files would not open due a perceived file permissions error.
  • Fixed bug where Chart Range Select control was enabled when in Average Chart Mode.
  • Fixed bug where the path in the folder starting with ‘\\’ was being converted to ‘\’ when the folder was saved.
  • Enabled saving Multi Chart files containing .sltd files
  • No correctly disables annotate chart mode when leaving a Multi Chart tab.
  • Corrected a crash when prompting for logger password during configuration with profile.
  • Profile name changes are now saved.
  • Fixed a bug when trying to save files without extensions crashed Analyzer.
  • Fixed not being able to set a Download Password for the UTRID-16 LogTag.
  • Corrected bug where default document display settings for zooming to Marks was displaying inconsistent charts.
  • Corrected bug where download mark on last reading and default display set to last mark last reading would sometimes crash analyzer.
  • Fixed showing marks on the latest model TRED30-16R graphs.

SDK 3.0.8

  • Support for Check digits in Interfaces and products with serial numbers that start with an alpha character.
  • Increased accuracy Battery Test implemented for SRIL-8 and TRIL-8 products.
  • Fixed bug where trying to configure a newer TRIL/SRIL would cause an comms error to be returned.
  • Added support for the up and coming HID Interface.
  • UTRIX-16M and USRIC-8M with firmware versions >= 6.6.1 now return logger model name without “M".
  • Fix to correctly set older HAXO firmware Humidity alarm alert values which were causing incorrect red LED behavior.
  • Updated NextStart date/time member of ProductInfo for USB loggers to be in Configure Timezone and not UTC.
  • Fixed bug where clock change flag was not being set in the reading when found (TRID/TRED).
  • Added a wait for user server reply when user server is running on the local PC.

3.0 release 7

  • Fixed bug where Range Selection was re-enabled after the tab was changed even when there were only started or pre-start readings.
  • Fixed bug with some files being generated were incompatible with LTA 2.x
  • Fixed zooming bug when less than 2 started or 2 pre-start readings and changing chart range.
  • Fixed bug when displaying a multi-chart report with some series turned off the chart image would not be generated.
  • Corrected Alignment issues, Chart and Chart Menu display with non-English languages.
  • fixed functionality for ‘Reset all documents to selected options’ in Options -> Charts when the checkbox is not checked.
  • Fixes to Report to ensure all DateTimes using settings from Options -> Date and Time.
  • Fixes to Report where the logo image was sometimes not displayed.
  • Fixed Email validation, where sometimes recipient email addresses were not being correctly validated
  • Fixed bug where adding a new window before saving a multi-chart could cause a crash.

SDK 3.0.7

  • SDK change for TRED30-16R configuration: Clear beeper status on configuration for firmware version 5.2x

3.0 release 6

  • Changed the main menu to truncate long foreign words in order to avoid Icon buttons growing too large
  • Fixed Report to cater for long translated terms.
  • Fixed Multi-Chart Report Start and Finish times.
  • Fixed Rendering for non validated series under certain conditions.
  • Added Help file topic links and F1 support to the various forms
  • Added TRED30-16R support to TRID_TRED profiles.
  • Save file open path when opening documents so is not lost on Analyzer close.
  • Added specific readings compare for stopped loggers download so support auto-saving re-calibrated loggers.
  • Fixed profiles so alarm temperatures are converted between different Temperature ranges.
  • Added Max readings option to profiles.
  • Fixed bug where email generated by clicking SendMail did not wait for PDF generation to complete if the file was not already present.
  • Fixed Bug where Saving a document over another document that was currently open could cause Analyzer to crash.
  • Fixed scaling bug with Chart when disconnected readings are present.
  • Fixed bug where reading marks where being shown on Invalid readings.
  • Fixed bug where Windows List Separator for csv export was actually using selected language List Separator.
  • Fixed bug where font styles were not being displayed in the annotations dialog.
  • Fixed bug where email generated by clicking SendMail did not wait for PDF generation to complete if the file was not already present.
  • Fixed download bug with USB LogTags where a download could sometimes cause the program to stop responding.
  • Fixed download bug where a file would be displayed automatically even if the option was not selected, if no new file was being created.
  • Added Manual Scaling by Index to Chart Manual Scaling.
  • Added Print All functionality

SDK 3.0.6

  • Fixed bug where Calibration Checksum was not recalculated after clearing the re-calibrated readings flag on configure.
  • Added fall-back to Start Log Time when Last Log time is corrupted for USB products.
  • Added support for new version USRIC-4.
  • Added support for LogTag Wifi Interface generated ltd files.
  • Added Tadiran loaded battery test support on device Configuration.
  • Updated HAXO 2.2 battery voltage calculation to provide actual voltage instead of pass/fail
  • Added fix for Hibernating USB products with DateTime start, sets to Push Button Start
  • Added Support for USRIC-16

3.0 release 5

  • Added Support for UTRID-16, UTRIX-16M, and USRIC-8M LogTags.
  • Added Support for the TRID30-16R.
  • Added profile support for new products.
  • Added viewing of, and configuring with, ReadOnly profiles.
  • Added Russian, German and Spanish Language Support.
  • Added Prioritize Download option to the configuration of USB LogTags.
  • Added support for pdf timezone display for USB pdf LogTags.
  • Added additional warning messages and increased error message support.
  • Increased performance for rendering charts with many readings in Single Chart mode.
  • Better Support for Windows scaling for high resolution displays.
  • Fixed several bugs to do with creating, editing and applying profiles.
  • Updated the wizards to use progress bars.
  • Fixed several bugs which could cause Analyzer to crash under unusual circumstances.
  • Fixed USB LogTags communications on Windows 10.
  • Modified various dialogs so they remain on top until actioned.
  • Fixed some bugs in statistics generation for several unusual circumstances.
  • Fixed Alarm state for reports with zoomed readings to only calculate state off the zoomed readings.

SDK 3.0.5

  • Added Support for UTRID-16, UTRIX-16M, and USRIC-8M LogTags.
  • Added Support for the TRID30-16R.

3.0 release 3

  • Added Configuration Profiles, creation, import, export and read-only.
  • Added Configure LogTags from Profile.
  • Added create profile from current logger settings in configure dialog.
  • Added option to retain Password/UserID during configuration.
  • Linked Temperature and Humidity Clear Alarm Checkboxes when configuring a HAXO-8.
  • Renamed User ID to Description.
  • Restricted Description field for USB loggers to 50 characters to retain usability with Generated PDFs.
  • Added display of Preset specified maximum trip length in days.
  • Updated USB Download Password checkbox so when enabled, removes the file settings tab.
  • Fixed result displayed when downloading Indicator products using Download and Wizard.
  • Added code to manually and automatically check for updated versions of LogTag® Analyzer.
  • Added ability to automatically download and install newer versions of LogTag® Analyzer.
  • Displays important details about upgrade within the Check for Updates Window.
  • Added ability to export Day Summary as a second file when exporting an ltd into a text format.
  • Can now Export a TICT or TIC20 into a text format and it will export the Day Summary table.
  • Fixed some bugs in statistics generation for some alarm counts with delayed alarms.
  • Using SendMail command will now create additional exported files if they are not already present.
  • Added saving ltd data into exported PDF files.
  • Updated UI to fix bugs caused by Windows Scaling be greater than 100%.
  • Some fixes to Themes within LogTag® Analyzer, others removed.
  • Some changes to Icons and images within LogTag® Analyzer.
  • Corrected line thickness for Average Multi-Charts.
  • Added escape key functionality to close many of the forms.
  • Added processing dialog for multi-chart operations to indicate program activity.
  • Added opening of PDFs which contain ltd data (LogTag® Analyzer and USB logger PDFs).
  • Fixed bug with Multi-Chart displaying Paused Marks for USB Pause readings.
  • Changed Temperature/Humidity alert range from checkbox to toggle button.

SDK 3.0.3

  • Fixed bug with TRID when Temperature was an exact match to the top calibration table value.
  • Updated SDK to assume a log interval of 1 minute if the log interval value is 0.
  • Added EvenInterval flag to HAXO-8 to restrict log interval to even seconds.
  • Added recovery code for readings if clock has become corrupted after primary logging has commenced.
  • Updated SDK to support Prototype TRIX-8 files/units which do not have a SensorID recorded.
  • Correctly write new checksum when a battery de-rate is carried out.
  • Fixed iS0°Tag code to correctly detect when the unit is still logging.

3.0 release 2

  • Chart Control Panel now uses check boxes instead of buttons.
  • Chart Control Panel can now be shown or hidden. The default can be set in Options – General Settings.
  • Hide Logon/Logoff button on Menu if User Server is not set up.
  • Removed bold text when menu items are disabled; increased text size for readability.
  • Updated Menu to hide unused overflow buttons, updated control intelligence depending on document and program state, also updated Chart Control Panel with same functionality.
  • Theme changes to LogTag® Analyzer, new icons and images, added various colour changes to text.
  • Updated default chart colour palette to be different from initial custom chart colour palette.
  • Updated Black Theme with many fixes for Dark Text, background colours, corrected some image issues.
  • Added option to preserve a LogTag®s description/password to the configuration dialogue and the wizard.
  • Updated configuration dialogue to hide the password entry field if not enabled via one of the checkboxes.
  • Fixed bug with export format for exporting a LogTag® with only prestart readings.
  • Updated configuration dialogue to disable number of readings control if wraparound selected.
  • Added automatic adjustments to the ‘Days’ configuration control.
  • Removed sliders for configuration of days and readings.
  • Fixed bug with configuring only accumulative alarms with some models.
  • Added basic information to file properties for multi-chart files.
  • Fixed delays and periods of non-responsiveness when closing and opening wizard forms.
  • Fixed “Not Found" on first open of wizard form when previous form was closed in the middle of an operation.
  • Modified HTML export format to use visually formatted tables for exports.
  • Added configure and download logging functions for logging data including several new fields. Changed all logging functionality to point to a combined log folder.
  • Added ability to view saved log files (config, download) in HTML formatted tables (With Save As and Print buttons).
  • Fixed bug with displaying email options in Options – Automation.
  • Added UTF-8 encoding marker bytes to start of text files.
  • Fixed custom scale range to appear relative to settings window. Fixed some bugs with custom scaling and chart range scaling boundary conditions with controls.
  • Added Import and Export functions for the option settings via the .asxml format
  • Fixed bug with Validation of date & time Settings in Options – Date and Time where certain selections were not working correctly.
  • Enabled Zoom Out functionality with Data Tab displayed.
  • Updated text annotations to be multi-line via Enter when editing.
  • Document page tabs now have bold text to improve tab visibility.
  • Fixed bug with Auto-Save and Multi-chart Save As interactions.
  • New documents now have their tab added to right side and are brought to the front.
  • Report notes and print preview windows no longer open as topmost panels.
  • Updated TICT and TIC20 rounding for maximum and minimum temperatures for negative values to match display.

SDK 3.0.2

  • Added new EXTRA flag for even second clock limitations to the SDK which is used to indicate when the firmware requires an even seconds interval.
  • Added more recovery Checks in SDK to try and correct and display data from corrupted loggers and truncated memory reads.
  • Fixed bug with time calculation function for iS0°Tag products in SDK.
  • Added USB Port re-enumeration function to SDK when FTDI USB Interface stops responding.
  • Updated LogTag® Analyzer to handle USRIC-4, USRIC-8 and UTRIX-16 products, display PDF time zone date-times when Configuration Display Time Zone is selected.
  • Added Mass Storage Hold-Off support for future USB products.