USRIC-4 SINGLE-USE USB TEMPERATURE LOGGER

  • Integral USB connector – no separate Interface Cradle required.
  • Suitable for multiple independent receivers, clinical trials and last-mile distribution.
  • User configurable options – no need to buy a special recorder for each application.
  • 4000 reading memory capacity with 6 months operating life from the time of configuration.

Designed as a Single-use, cost effective & reliable temperature recorder, the LogTag® USRIC-4 measures and stores real time temperature readings over a measurement range of -30°C to +60°C (-22°F to +140°F). The USRIC-4 combines all the features of an advanced temperature recorder with a 3937 log memory and a 6-month operating life in a robust and inexpensive package.

The USRIC-4 plugs directly into the computer USB for easy configuration by the user for a wide range of recording and alert conditions. Readings are downloaded using LogTag Analyzer®, which provides facilities for displaying data in chart, table or statistical formats and allows electronic archiving, export or transmission of the data in support of sophisticated data management systems.

A red alert indicator provides an immediate indication – without access to a PC – if any readings are outside the limits specified at the time the unit was configured. A green OK indicator provides immediate visual confirmation that the unit is operating.

SPECIFICATIONS

Product ModelUSRIC-4.
Sensor Measurement Range-30°C to +60°C (-22°F to +140°F)
Operating Temperature Range-30°C to +60°C (-22°F to +140°F).*
Storage Temperature Range0°C to +40°C (-32°F to +104°F).
Rated Temperature Reading Accuracy Better than ±0.5°C for -5°C to +30°C.
Better than ±0.8°C or better for measurements in other areas of rated range.
Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below.
Accuracy figures can be improved by recalibration.
Rated Temperature Reading Resolution Less than 0.1°C/F.
Please see the Rated Native Resolution chart below.
LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
Sensor Reaction TimeTypically less than 5 minutes (T90) in moving air (1m/s).
Recording Capacity3937 temperature readings. 14 days @ 5min logging, 41 days @ 15min logging.
Sampling IntervalConfigurable from 1 minute to 18 hours.
Logging Start OptionsPush button start or specific date & time.
Recording IndicationFlashing ‘OK’ indicator / flashing ‘ALERT’ indicator.
Download TimeTypically less than 4 seconds for full memory (3937 readings), depending on computer or readout device used.
EnvironmentalIP64 with USB cap fitted.
Power Source3V Li-Mg Battery.
Battery LifeShelf life of up to two years before configuration. Six months operating life from the time of configuration.
Real Time Clock Built-in real time clock.
Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day).
Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
Connection InterfaceUSB 2.0, A-type plug
SoftwareLogTag® Analyzer 2.5 or higher
Size93mm(H) x 54.5mm(W) x 8.6mm(T).
Weight30g.
Case MaterialPolycarbonate.
Footnote*(-30°C to +60 °C applies to Loggers with serial numbers 5x34x33580 or greater. Loggers with serial numbers prior to this have an operating temperature range of -25°C to +60°C).

Compliance and Certifications
FDA CFR21 Part 11 FCC EMC Directive CE EMC Directives Conforms to RoHS

View other LogTag® products